Mitsubishi Outlander 2017 Owner's Manual page 59

Child restraint systems
Installing a child restraint sys-
tem using the LATCH (Lower
Anchors and Tethers for chil-
dren) system
4
Lower anchor locations
The outboard seating positions in the second
row seat of your vehicle are equipped with
lower anchors for attaching child restraint
systems compatible with the LATCH system.
NOTE
 The symbols on the seatback show the loca-
tion of the lower anchor points.
4-30 Seat and restraint systems
Tether anchor locations
Your vehicle has 3 attachment points on the
backside of the second row seats. These are
for securing a child restraint system tether
strap to each of the 3 rear seating positions in
N00418801167
your vehicle.
Examples of child restraint sys-
tems compatible with the LATCH
N00418901201
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
Using the LATCH system
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
N00419000198
N00419101271