Mitsubishi Outlander 2017 Owner's Manual page 316

To adjust the sensitivity of the rain sensor
With the lever in the "AUTO" position, it is
possible to adjust the sensitivity of the rain
sensor by turning the knob (B).
"+"- Higher sensitivity to rain
"-"- Lower sensitivity to rain
NOTE
 Automatic wiper operation (rain sensitive)
can be changed to intermittent operation,
either vehicle speed sensitive or not vehicle
speed sensitive.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate owner's manual for
details.
Misting function
Move the lever in the direction of the arrow
and release, to operate the wipers once.
Use this function when you are driving in
mist or drizzle.
The wipers will operate once if the lever is
raised to the "MIST" position and released
when the ignition switch or the operation
mode is in ON or ACC. The wipers will con-
tinue to operate while the lever is held in the
"MIST" position.
Wiper and washer switch
The wipers will operate once if the lever is
moved to the "AUTO" position and the knob
(C) is turned in the "+" direction when the
ignition switch or the operation mode is in
ON.
Windshield washer
The windshield washer can be operated with
the ignition switch or the operation mode in
ON or ACC.
The washer fluid will be sprayed onto the
windshield by pulling the lever toward you.
When the wipers are not in operation or in
intermittent operation, by pulling the lever
toward you, the wipers will operate several
times while the washer fluid is being sprayed.
Features and controls
5
N00504601354
5-235