Mitsubishi Outlander 2017 Owner's Manual page 135

Parking brake
Lever type parking brake
equipped)
To apply
5
1- Pull the lever up without pushing the
button at the end of hand grip.
When the parking brake is set and the
ignition switch is in the "ON" position,
the brake warning light in the instru-
ment cluster will come on.
When parking on a hill, set the parking brake,
and turn the front wheels toward the curb on a
downhill, or away from the curb on an uphill.
5-54 Features and controls
To release
(if so
N00593100020
1- Pull the lever up slightly.
2- Press and hold the button at the end of
the hand grip.
3- Push the lever downward.
Before driving, be sure to release the parking
brake.
CAUTION
 Before driving, be sure that the parking
brake is fully released and brake warning
light is off.
If you drive without the parking brake fully
released, the warning display will appear on
the information screen in the multi-informa-
tion display.
If a vehicle is driven without releasing the
parking brake, the brakes will be overheated,
resulting in ineffective braking and possible
brake failure.
Warning light (red)
or
Warning display
Electric parking brake
equipped)
The Electric parking brake is the system that
applies the parking brake by the electric
motor.
(if so
N00593200021