Mitsubishi Outlander 2017 Owner's Manual page 186

To temporarily increase or
decrease the speed
To temporarily increase the speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
 In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to "To activate" on page 5-103 and
N00541701066
repeat the speed setting procedure.
To temporarily decrease the speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the RES + switch (C).
Refer to "To resume the set speed" on page
5-106.
Cruise control (if so equipped)
To deactivate
The set speed driving can be deactivated as
follows:
 Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
 Press the CANCEL switch (D).
 Depress the brake pedal.
Features and controls
5
N00518801575
5-105