Mitsubishi Outlander 2017 Owner's Manual page 329

Bluetooth® 2.0 interface
NOTE
®
 Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
 The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
5
to select.
Remember the pairing code as it needs to be
®
keyed into the Bluetooth
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
®
tooth device to the Bluetooth
face. For the default connection settings,
refer to the instructions for the device.
7. The voice guide will say "Start pairing
procedure on the device. See the device
manual for instructions." Enter in the
®
Bluetooth device the 4-digit number you
have registered in Step 6.
NOTE
 Depending on the Bluetooth
take a few minutes to pair it with the Blue-
®
tooth 2.0 interface.
5-248 Features and controls
NOTE
 If the Bluetooth
nize the Bluetooth
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
 If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
device later in the ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
8. The voice guide will say "Please say the
name of the device after the beep." You
®
2.0 inter-
can assign a desired name for the Blue-
®
tooth device and register it as a device
tag. Say the name you want to register
after the beep.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?"
Answer "Yes."
To change the device tag, answer "No" and
then say the device tag again.
®
device, it may
9. The voice guide will say "Pairing com-
plete," and the pairing process will end.
 Pairing procedure- Type 2
®
2.0 interface cannot recog-
®
device, the voice guide
1. Stop your vehicle in a safe area, put the
®
, and try pairing it again.
2. Press the SPEECH button (except for
3. Say "Pair Device."
(if so
equipped)
selector lever in the "P" (PARK) position
and apply the parking brake.
NOTE
®
 You cannot pair any Bluetooth device with
®
the Bluetooth 2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth 2.0 interface,
confirm that the vehicle is parked in a safe
location.
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
®