Mitsubishi Outlander 2017 Owner's Manual page 196

NOTE
 You can also cancel the ACC control by
pressing the "ACC ON/OFF" switch. If this
switch is pressed while the ACC is "ON",
the ACC will be turned off.
When the ACC is canceled, the "SET" indi-
cator goes off and the following distance indi-
cator turns to the 'standby' display. The front
vehicle indicator also turns to the 'standby'
display when a front vehicle is detected.
Adaptive Cruise Control System (ACC) (if so equipped)
In any of the situations listed below, the ACC
control is automatically canceled, a buzzer
sounds and a message is shown in the multi-
information display.
 When your vehicle stops.
 When the ASC is turned off.
 While ABS, ASC or TCL is activated.
 When the selector lever is in a position
other than "D" (DRIVE) and "Ds"
(DOWNSHIFT & SPORTY DRIVING).
 When the parking brake is applied.
When the ACC system determines that its
performance has been degraded, a buzzer will
sound and a message will be displayed in the
multi information display.
This can occur when
 Foreign objects, such as dirt, snow or ice,
adhere to the surface of the radar sensor.
 In adverse weather conditions, such as
rain, snow or sand storms, etc.
 A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
 Driving on a nonbusy road with a few
vehicles and obstacles in front.
 The brake system is overheating due to
continuous brake control on long down-
hill slope.
Features and controls
5
5-115