Mitsubishi Outlander 2017 Owner's Manual page 291

Indicator light, warning light, and information screen display list (multi information display - Type 1)
Other interrupt displays
Screen
5
The operation status of each system is displayed on the information screen. For further details, refer to the appropriate page for each system.
Screen
5-210 Features and controls
Cause
 When starting the engine, the selector
lever is in a position other than the "P"
(PARK) or the "N" (NEUTRAL) posi-
tion, or you pressed the engine switch
without depressing the brake pedal.
System operation status
 When "4WD ECO" drive mode is
selected with the drive mode selector.
 When "4WD AUTO" mode is selected
with the drive mode selector.
 When "4WD LOCK" mode is selected
with the drive mode selector.
Do this (Reference)
 Place the selector lever in the "P"
(PARK) position, depress and hold the
brake pedal with the right foot, and then
press the engine switch to start the
engine.
Refer to "Starting and stopping the
engine" on page 5-25.
Reference
Refer to "Electronically controlled 4WD
system" on page 5-82.
N00558201324