Mitsubishi Outlander 2017 Owner's Manual page 145

Ignition switch
LOCK (Type 2)
The engine is off and the steering wheel is
locked. The key can be inserted and removed
only when the switch is in this position.
OFF (Type 1)
5
The engine is off. The key can be inserted and
removed only when the switch is in this posi-
tion.
ACC
Allows operation of electrical accessories
with the engine off.
ON
All accessories can be used.
START
Engages the starter. Release the key when the
engine starts.It will automatically return to
the "ON" position.
5-64 Features and controls
NOTE
 Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered to the immobi-
lizer computer. (Refer to "Electronic immo-
bilizer" on page 5-4.)
ACC power auto-cutout func-
tion
After about 30 minutes has elapsed with the
ignition switch in the "ACC" position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from the
"ACC" position, the power is supplied again
to those devices.
NOTE
 It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to about 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
NOTE
For details, we recommend you to consult an
authorized Mitsubishi Motors dealer.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate Mitsubishi Multi-Com-
munications System manual for details.
To remove the key
N00539601071
Type 1
When removing the key, first set the selector
lever to the "P" (PARK) position, and then
turn the key to the "OFF" position and
remove it.
N00550901211