Mitsubishi Outlander 2017 Owner's Manual page 100

Table of Contents

Advertisement

CAUTION
 If the engine switch operation is not smooth
and feels like it is sticking, do not operate the
switch.
Immediately contact an authorized Mitsubi-
shi Motors dealer.
NOTE
 When operating the engine switch, press the
switch all the way in. If the switch is not
fully pressed, the engine may not start or the
operation mode may not change. If the
engine switch is pressed correctly, there is no
need to hold the engine switch down.
Operation mode of the engine
switch and its function
 OFF
The indicator light on the engine switch turns
off.
The operation mode cannot be put in OFF
when the selector lever is in any position
other than the "P" (PARK) position.
 ACC
Allows operation of electrical accessories.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
The indicator light on the engine switch illu-
minates orange.
 ON
All electrical accessories can be used.
The indicator light on the engine switch illu-
minates green.
The indicator light goes off when the engine
is running.
NOTE
 Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the F.A.S.T.-key sends must match the
one registered to the immobilizer computer.
(Refer to "Electronic immobilizer (Anti-theft
starting system)" on page 5-18)
Changing the operation mode
If you press the engine switch without press-
ing the brake pedal while the vehicle is sta-
tionary, you can change the operation mode
in the order of OFF, ACC, ON, OFF.
CAUTION
 When the engine is not running, put the oper-
ation mode in OFF. Leaving the operation
mode in ON or ACC for a long time when
the engine is not running may cause the bat-
tery to be discharged, making it impossible
to start the engine.
 When the battery is disconnected, the current
operation mode is memorized. After recon-
necting the battery, the memorized mode is
selected automatically. Before disconnect-
N00568001035
ing the battery for repair or replacement,
make sure to put the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the battery
is run down.
 The operation mode cannot be changed from
OFF to ACC or ON if the F.A.S.T.-key is not
detected to be in the vehicle. Refer to "Oper-
ating range for starting the engine and
changing the operation mode" on page 5-15.
Features and controls
5
5-19

Advertisement

Table of Contents
loading

Table of Contents