Handling; Transport; Storage; Unpacking / Checking Scope Of Supply / Repacking - Lenord+Bauer MiniCODER GEL 2444K Series Operating Instructions Manual

5 Handling

5 Handling
Magnetic field!
WARNING
●
Ensure that there is at least 30 cm spacing between the implants
and the products.
5.1

Transport

 Only transport the product in the manufacturer's original packaging, which is suit-
able for recycling (cardboard box with foam insert; ESD protection packaging).
 Observe the temperature range specified.
 If the packaging is damaged, check the product for visible damage. Inform the
freight carrier and if necessary the manufacturer.
5.2

Storage

 Observe the temperature range specified.
 Only store the product in the manufacturer's original packaging, which is suitable
for recycling (cardboard box with foam insert; ESD protection packaging).
5.3

Unpacking / Checking scope of supply / Repacking

NOTICE Electrostatic discharge!
●
Only touch the connector pins and connection wires if your body is
suitably earthed.
 Check whether the device designation of the MinCODER matches the order.
 Check that the scope of supply is complete.
 Package the product in the recyclable original packaging or retain the packaging
for subsequent use.
5.4

Service / repair

If you cannot rectify faults yourself or you want to send a product for repair, please
contact our Service department. You will receive quick, professional support from our
qualified personnel.
You will information on our Service department on our homepage www.lenord.com.
Please have the following information at hand:
●
Product identifier (see rating plate marking)
●
Serial number (see rating plate marking)
●
Description of the fault
58
Transport Lenord+Bauer
GEL 2444