Setting The Time Of The Day; Controller Setting; Language Setting - Pentair FLECK 2910 NXT Installer Manual

Installer Manual Fleck 2910 - NXT - Programming
6.3.

Setting the time of the day

Set the time in the system.
A
Mandatory
In multiple valve systems, set the time of day on the lead valve (#1).
A
Note
The time of day will be automatically updated on the other valves in the system within 10
seconds.
A
Note
If, during time setting, no buttons are pushed for 5 seconds, the system leaves setting.
A Press or
B Set the controller with
C Press to validate the selection and return to the service
mode.
6.4.

Controller setting

A
Note
As soon as programming mode is entered, all parameters can be displayed or set to suit the
needs. Depending on the current programming, some functions will not be displayed or will
not be changeable.
A
Note
If none of the buttons are pushed for 5 minutes in the Programming mode, or if there is a
power failure, the controllers returns to Service mode without saving.
A
Mandatory
In order to store the new settings in the programming mode, it is necessary to go through
all the parameters.
A Press and
master programming mode.

6.4.1. Language setting

Select the displayed language.
Options:
• English;
• French;
• German;
• Italian;
• Spanish.
B Select the language to be displayed with
C Press to validate the selection and advance to the next
parameter.
52 / 98
for 2 seconds.
, and
simultaneously for 5 seconds to enter the
.
and .
SET TIME OF DAY:
08:43HR
7#1 SRV* 08:26HR
VOLUME
SELECT LANGUAGE:
ENGLISH
Ref. MKT-IM-002 / A - 18.11.2016
20000L