Bypassing - Pentair FLECK 2910 NXT Installer Manual

Installer Manual Fleck 2910 - NXT - Installation

5.10. Bypassing

A bypass valve system should be installed on all water conditioning systems. Bypass valves isolate the
softener from the water system and allow unconditioned water to be used. Service or routine
maintenance procedures may also require that the system is bypassed.
.
Normal
operation
Out

A
Caution
Do not solder pipes with lead-based solder.
A
Caution
Do not use tools to tighten plastic fittings. Over time, stress may break the connections.
A
Caution
Do not use petroleum grease on gaskets when connecting bypass plumbing. Use only 100%
silicone grease products when installing any plastic valve. Non-silicone grease may cause
plastic components to fail over time.
48 / 98
Softening
System
In
In Bypass
Softening
System
Out
Ref. MKT-IM-002 / A - 18.11.2016
In