Table of Contents
Advertisement
Installer Manual Fleck 3900 - NXT - Programming
A
Press
to pass to the next step.
B
Use
to move the cursor to the next digit.
C
Use
and
D
Press D at any time to exit programming mode without saving.
6.3.
Setting the time of the day
Set the time in the system.
Mandatory
In multiple valve systems, set the time of day on the lead valve (#1).
Note
The time of day will be automatically updated on the other valves in the system within 10
seconds.
Note
If, during time setting, no buttons are pushed for 5 seconds, the system leaves setting.
A
Press
or
B
Set the controller with
C
Press
to validate the selection and return to the service
mode.
6.4.
Basic programming
Note
Menus are displayed in a defined and incremental order.
6.4.1. Language setting
Select the displayed language.
Options:
•
English;
•
French;
•
German;
•
Italian;
•
Spanish.
A
Press
and
menus sequence.
58 / 126
to adjust the values.
for 2 seconds.
,
and
simultaneously for 5 seconds to enter the
.
SET TIME OF DAY:
08:43HR
SELECT LANGUAGE:
ENGLISH
Ref. MKT-IM-015 / B - 08.06.2018
Advertisement
Table of Contents
