Hard Starting Or Stalls After Starting - TOHATSU BFT 150A Owner's Manual

Hide thumbs Also See for BFT 150A:
Table of Contents

Advertisement

HARD STARTING OR STALLS AFTER STARTING

Possible Cause
Fast idle lever raised (side-mount type).
Fuel hose not primed.
Fuel filter or fuel tank filter clogged.
Bad fuel; outboard motor stored without draining
gasoline, or refueled with bad fuel.
Water separator full of water accumulation.
TAKING CARE OF UNEXPECTED PROBLEMS
Leave fast idle lever OFF (p. 39).
Squeeze priming bulb (p. 37).
Replace fuel filters (p. 75).
Drain fuel tank and vapor separator (p. 85). Refill with
fresh gasoline (p. 74).
Clean water separator (p. 78).
Correction
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 115a

Table of Contents