Hard Starting Or Stalls After Starting - TOHATSU BFW 60A Owner's Manual

Hide thumbs Also See for BFW 60A:
Table of Contents

Advertisement

TAKING CARE OF UNEXPECTED PROBLEMS

HARD STARTING OR STALLS AFTER STARTING

Possible Cause
Throttle grip not in START position (tiller handle type).
Fast idle lever raised (remote control/side-mount type).
Fuel vent closed (portable fuel tank – optional
equipment).
Fuel hose not primed.
Fuel filter or fuel tank filter clogged.
Bad fuel; outboard motor stored without draining
gasoline, or refueled with bad fuel.
110
Turn throttle grip to START position (p. 52).
Leave fast idle lever in the START position (p. 55).
Open fuel filler cap vent (p. 39).
Squeeze priming bulb (p. 50).
Replace fuel filters (p. 92 and 96).
Drain fuel tank and vapor separator (p. 102). Refill with
fresh gasoline (p. 89).
Correction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 60a

Table of Contents