Engine Will Not Start - TOHATSU BFT 150A Owner's Manual

Hide thumbs Also See for BFT 150A:
Table of Contents

Advertisement

ENGINE WILL NOT START

Possible Cause
Clip not inserted in emergency stop switch.
Control lever not in neutral position.
Fast idle lever raised (side-mount type).
Out of fuel.
Fuel hose not primed.
Fuel filter or fuel tank filter clogged.
Bad fuel; outboard motor stored without draining
gasoline, or refueled with bad gasoline.
TAKING CARE OF UNEXPECTED PROBLEMS
Insert clip in emergency stop switch.
Shift to neutral.
Leave fast idle lever OFF (p. 39).
Refuel (p. 74).
Squeeze priming bulb (p. 37).
Replace fuel filters (p. 75).
Drain fuel tank and vapor separator (p. 85). Refill with
fresh gasoline (p. 74).
Correction
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 115a

Table of Contents