TAKING CARE OF UNEXPECTED PROBLEMS
FUSE PULLER
BLOWN FUSE
96
4. Use the fuse puller from the fuse
holder to remove the fuses. If a fuse
is blown, install a replacement fuse
of the same specified rating.
The outboard motor is supplied
with spare fuses in the junction box
lid.
MAIN FUSE RATINGS:
10 A, 15 A, 30 A
5. Reinstall the junction box lid, and
the engine cover.
6. Reconnect the battery.
Never use a fuse with a rating greater
than specified. Serious damage to the
electrical system could result.
If a blown fuse is found, try to
determine and correct the electrical
problem that caused the blown fuse.
An uncorrected electrical problem
may cause the fuse to blow again.
If fuses continue to blow, take the
outboard motor to an authorized
TOHATSU dealer for inspection and
service, or refer to the service
manual.