Table of Contents
Advertisement
SPARK PLUG COVER
5. Remove the two bolts with the 6
mm hex. wrench, and remove the
spark plug cover.
IGNITION COIL
WIRE CONNECTOR
LOCK TAB
6. Use a 6 mm hex. wrench to remove
the bolt holding the ignition coil.
Move the ignition coil to a position
that allows removal of the wire
connector easily.
7. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
BOLTS
8. Remove the ignition coil by pulling
it up slightly.
Do not strike or drop the ignition coil,
or it may be damaged and require
replacement.
BOLT
SERVICING YOUR OUTBOARD MOTOR
SPARK PLUG
WRENCH
9. Remove the spark plugs with a
10. Inspect the spark plugs. Replace
19 mm EYE
WRENCH
spark plug wrench and 19 mm eye
wrench.
New plug
Plug needing
replacement
them if the electrodes are worn, or
if the insulators are cracked or
chipped.
71
Advertisement
Table of Contents
