Water Separator Inspection And Service - TOHATSU BFT200A Owner's Manual

Tohatsu outboard motor owner's manual
Hide thumbs Also See for BFT200A:
Table of Contents

Advertisement

SERVICING YOUR OUTBOARD MOTOR
Water Separator Inspection and
Service
No.6 CYLINDER IGNITION COIL
WATER SEPARATOR
The water separator is located under
No. 6 cylinder ignition coil. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized TOHATSU dealer for
cleaning.
76
Gasoline is highly flammable and
explosive.
You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat,
sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
<Cleaning>
6 × 17 mm SPECIAL BOLTS
LEFT UNDER
COVER
6 × 17 mm 
SPECIAL BOLTS
1. Remove the engine cover (p. 61).
2. Remove the plug maintenance
cover (p. 68).
3. Remove the cover under the idle
port.
4. Remove the left under cover by
removing the 6 × 17 mm special
bolts.
IDLE
PORT
COVER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft225a

Table of Contents