How To Make Your Own Custom Program; Calibration Menu 1; Calibration Menu 2; Optional Wireless Dmx Mode - SHOWTEC City Painter 9000 LED Manual

City Painter 9000 LED

7.1. How to make your own custom program

01) First, start with PR.01 and add the desired settings in scene 1 (SC.01), then scene 2 (SC.02) , etc.
02) In this way you can add a maximum of 30 scenes.
03) After that, you can start with PR.02 and create a maximum of 30 scenes again.
04) You can repeat these steps, until you've reached PR.10, step 30.
05) It is possible to create 300 separate scenes.

8. Calibration menu 1

With this menu you can adjust the temperature of the built-in white color presets.
01) Press the MENU button until the display shows
02) Press the SET button to enter the menu.
03) Press the UP/DOWN buttons to choose one of the 11 white color presets:
04) Once you have chosen the desired preset, press the SET button to open the submenu.
05) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE, WHITE and AMBER.
06) Press the SET button to open the desired color's brightness settings.
07) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.

9. Calibration menu 2

With this menu you can adjust the temperature of the white color.
01) Press the MENU button until the display shows
02) Press the SET button to enter the menu.
03) Now you can adjust the intensity of the RGB colors. Press the UP/DOWN buttons to toggle between
RED, GREEN and BLUE.
04) Press the SET button to open the desired color's brightness settings.
05) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.

10. Optional Wireless DMX mode

Pay attention: this option is not available with the standard Citypainter. If you want to use this option, you
have to purchase the receiver and antenna. These spare parts SPWIR015 and SPWIR002 can be ordered
by contacting our Sales department.
With this menu you can activate wireless DMX and reset the wireless DMX.
01) Press the MENU button until the display shows
02) Press the SET button to enter the menu.
03) With the UP/DOWN buttons you choose between
04) You have to press the SET button to access one of the two options.
05) If you choose
Wireless DMX.
06) If you choose
07) After a few seconds the wireless link with the transmitter is interrupted.
08) Now you can use a different transmitter to make a wireless connection.

11. Keylock mode

With this menu you can set whether the display becomes locked after remaining idle for 30 seconds.
01) Press the MENU button until the display shows
02) Press the SET button to enter the menu.
03) Press the UP/DOWN buttons to choose between ON and OFF.
04) If you have selected ON, press the SET button to confirm.
05) It will now take 30 seconds for the device to become locked.
06) If this options remains active, the device will always ask for the password on start up.
07) In order to unlock the device, press the buttons in the following order: UP>DOWN>UP>DOWN and
press the SET button to confirm.
Ordercode: 40910
you can activate the Wireless DMX, choose "ON" if you want to activate
you can reset the Wireless DMX by choosing YES in the submenu.
.
.
.
or .
.
20
.