Mounting The Sensor; Programmable Magnetic Switch Mms 30 - SCHUNK SPG 100 Assembly And Operating Manual

2-finger-parallel gripper

Hide thumbs Also See for SPG 100:

Table of Contents

Assembly

4.3 Mounting the sensor

NOTE

Observe the assembly and operating manual of the sensor for

mounting and connecting.

The product is prepared for the use of sensors.

For the exact type designations of suitable sensors, please see

catalog datasheet and Link Übersicht Sensoren.

For technical data for the suitable sensors, see assembly and

operating manual and catalog datasheet.

– The assembly and operating manual and catalog

datasheet are included in the scope of delivery for the

sensors and are available at schunk.com.

Information on handling sensors is available at schunk.com or

from SCHUNK contact persons.

CAUTION

Sensor can be damaged during assembly.

Observe the maximal tightening torque of 30 Ncm.

NOTE

Ferromagnetic material changes the switching positions of the

sensor. For example: Adapter plate made of ordinary steel.

At ferromagnetic adapter plates:

First mount the product on the adapter plate.

Then set the position of the magnetic switch.

brown

black

blue

04.00 | SPG 100 | Assembly and Operating Manual | en | 0389423

closer

load

Table of Contents

0302121 0302120