Mounting The Sensor; Overview Of Sensors; Mounting Mms 22 Magnetic Switch - SCHUNK GAP Assembly And Operating Manual

5.4 Mounting the sensor

5.4.1 Overview of sensors

5.4.2 Mounting MMS 22 magnetic switch

07.00 | GAP | Assembly and Operating Manual | en | 389418
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
For the exact type designations of suitable sensors, please see
l
catalog datasheet and
For technical data for the suitable sensors, see assembly and
l
operating manual and catalog datasheet.
– The assembly and operating manual and catalog
datasheet are included in the scope of delivery for the
sensors and are available at schunk.com.
Information on handling sensors is available at schunk.com or
l
from SCHUNK contact persons.
Designation
Magnetic switch MMS 22
CAUTION
Material damage due to an incorrect tightening torque!
If the threaded pin is tightened with an incorrect tightening
torque, the product may be damaged.
Observe a maximum tightening torque of 10 Ncm for the set-
l
screws.
} 5.4.1 [/ 25].
16 20
X X
Assembly
GAP
28 32
X X
25