Mounting The Sensor - SCHUNK PFH 150 Assembly And Operating Manual

Assembly

4.3 Mounting the sensor

20
Air connections
Item Connection
1 Hose connection
(A = open, B = close)
2 Hose connection or Hose-free
direct connection
(a = open, b = close)
Only open the air connections required.
l
Seal air connections not required using
l
the locking screws from the enclosed pack.
For hose-free direct connections use the two O-rings from the
l
enclosed pack.
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is equipped for the use of sensors.
For the exact type designations of suitable sensors, please see
l
the catalog data sheet.
For technical data for the suitable sensors, see Assembly and
l
Operating Manual and catalog data sheet.
– The Assembly and Operating Manual and catalog data
sheet are included in the scope of delivery for the sensors
and are available at schunk.com.
Information on handling sensors is available at schunk.com or
l
from SCHUNK contact persons.
10.00 | PFH 150- 300 | Assembly and Operating Manual | en | 389270
Thread
G 1/4"
G 1/4"