6.1.14 MJ/PS Shield Unit, MJ PCB and Power Supply PCB
(1) Remove the two screws ("d" and "e").
(2) Release the bottom of the MJ/PS shield unit from the boss provided on the lower cover and
remove the MJ/PS shield unit from the underside of the lower cover.
Lower cover
PF encoder/registration
sensor harness
Paper feed motor harness
MJ/PS shield unit
Main-MJ (LINE) harness
Main-MJ (EXT) harness
"d"
"e"
Cutout
Power supply harness
Viewed from the bottom
Cutout in the bottom of
the MJ/PS shield unit
"d": Screw, pan (s/p washer) M3x8
"e": Taptite, cup S M3x6
6-35
Lower cover
Boss on the lower cover
(6_32)
Confidential