Eeprom Parameter Initialization (Function Code 198) - Brother FAX1960C Service Manual

9.2.2.5

EEPROM Parameter Initialization (Function code 198)

Function
This function initializes the contents of the EEPROM in the cordless handset to the initial values,
erasing all personal information stored.
NOTE: This function also erases the cordless handset ID code and base ID code which have been
registered to the EEPROM in the cordless handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, #, 1, 9, 8, and # keys in this order in the
standby state.
The following appears on the handset's LCD.
E2PROM INIT
1. Yes 2. No
Number input
(2) To initialize the contents of the EEPROM in the cordless handset, press the 1 key; to cancel
initialization, press the 2 key.
If you press the 1 key, the following confirmation screen appears.
All Delete?
1. Yes 2. No
Number input
(3) To initialize it, press the 1 key again; to cancel initialization, press the 2 key.
(4) To return to the standby state, press the Off key or leave the handset for one minute without
pressing any key.
9-57
Confidential