Brother FAX1960C Service Manual page 178

(3) Remove screw "f" from the MJ shield and take it off the lower MJ/PS shield.
(4) Remove screw "g" from the MJ PCB and take it off.
(5) Remove screw "h" from the power supply shield and take it off.
(6) Remove four screws "i" from the power supply PCB and take it off.
(7) Unlatch the power supply bottom plate.
Latches
Power supply
bottom plate
Power cord
Power supply shield
"h"
Tab
Opening "x"
"f"
MJ shield
"g"
CN2
MJ PCB
"i"
3
"i"
"i"
2
4
"i"
1
Tighten four screws in the
order of
Tab
Power supply harness
"f" and "h": Screw, pan (s/p washer) M3x8
"g" and "i": Taptite, cup S M3x6
6-36
Main-MJ (LINE)
harness (blue)
CN1
Main-MJ (EXT)
harness (black)
Lower MJ/PS shield
Slit
Power supply PCB
to .
Opening "y"
Slit
(6_33)
Confidential