Maintenance Mode For The Machine; Entry Into The Maintenance Mode - Brother FAX1960C Service Manual

9.1 MAINTENANCE MODE FOR THE MACHINE

9.1.1 Entry into the Maintenance Mode

Press the Menu and Black Start (Mono Start) keys in this order. Next press the
make the machine enter the maintenance mode.
TIP: FAX models equipped with a numerical keypad can enter the maintenance mode in the same
way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this order.
The machine beeps for approx. one second and displays "
indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine
is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in
NOTES • To exit from the maintenance mode and switch to standby, press the 9 key twice in the
• Pressing the Stop/Exit key after entering only one digit restores the machine to the
• If an invalid function code is entered, the machine resumes the initial stage of the
Section
initial stage of the maintenance mode.
initial stage of the maintenance mode.
maintenance mode.
Section
9.1.4.)
9-1
key four times to
" on the LCD,
9.1.2, enter the corresponding 2-
Confidential