Brother FAX1960C Service Manual page 152

For models with cordless handset
(1) Open the control panel ASSY.
(2) Open the upper jam clear cover and pull up the right end to remove the cover.
(3) Remove the four screws from the rear cover and take it off.
NOTE: Do not pull the rear cover away from the machine since it is connected to the main
PCB with a short charge harness.
(4) Disconnect the charge harness from the main PCB.
Disconnecting the charge harness
(Viewed from the rear)
Main PCB
(5) Turn the rear cover upside down.
(6) Remove the screw from the charge PCB and unlatch it.
Upper jam clear
cover
Inner
frame
Lower
cover
Charge harness
Lower cover
Charge PCB
Latch
Taptite, bind B
M4x12
Taptite, cup B
M3x8
6-10
Rear cover
Control panel ASSY
Charge harness
Rear cover
(placed upside down)
(6_08)
Confidential
(6_07)