Inner Frame - Brother FAX1960C Service Manual

6.1.13 Inner Frame

(1) Remove the four screws from the inner frame.
(2) Take the ink absorber box out of the inner frame in the direction of the arrow and put it as
shown below.
NOTE: Do not pull out the two tubes (main drain tube and opening tube to the atmospheric
air) from the ink absorber box. Once they are pulled out from the ink absorber box, they will
become unusable and new parts will have to be put back in. Using the removed tubes again
may result in an ink leakage.
(3) Lift the inner frame up and out of the lower cover.
Taptite, bind B
M4x12
Peep hole
Paper feed
motor harness
PF encoder/registration
sensor harness
Paper feed motor harness
PF encoder/registration
sensor harness
Main-MJ (EXT) harness
Main-MJ (LINE) harness
Inner frame
6-33
Head flat cables
Lower cover
Power supply harness
Ink absorber box
Carriage motor harness
Ink cartridge sensor harness
Purge cam switch harness
(6_30_2)
Confidential