Switching To The Information Level - ABB TTF300 Operating Instruction

50 TTF300 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF300-EN REV. I
... 10 Operation

Switching to the information level

(only for PROFIBUS PA®, FOUNDATION Fieldbus®, and HART®
from SW-Rev.: 03.00)
On the information level, the operator menu can be used to
display diagnostic information and choose which operator
pages to display.
Process display
1. Open the using Operator Menu.
Operator Menu
Diagnosis
Operator Page 1
Operator Page 2
Back Select
2. Select the desired submenu using
3. Confirm the selection with
Menu Description
... / Operator Menu
Diagnosis Selection of the "Diagnosis" submenu, see also Error
messages in the HART® LCD display on page 48 und
Error messages in the PROFIBUS PA® and
FOUNDATION Fieldbus® LCD display on page 49.
Operator Page 1 Selection of operator page to be displayed.
Operator Page 2*
Autoscroll* When 'Multiplex mode' is activated, automatic
switching of the operator pages is initiated on the
process screen.
Signal View Selects the 'Signal View' submenu, in which all
dynamic measured values are displayed.
* Only for PROFIBUS PA® and FOUNDATION Fieldbus®
/ .
.
Switching to the configuration level
(parameterization)
The device parameters can be displayed and changed on the
configuration level.
Process display
1. Switch to the configuration level using
The LCD display now indicates the first menu item on the
configuration level.
2. Select a menu using
3. Confirm the selection with
.
/ .
.