Spectralink 7622, 7642 User Guide
Call Waiting: SIP Enabled Spectralink DECT or IP DECT Server
While on a call, press OK to answer a second incoming call. The first call is automatically put
•
on hold.
To disconnect the active call and return to the waiting call, press
•
To end both calls, press
•
To swap between two calls, press Options and select Swap calls or press R to swap.
•
Call Waiting: Spectralink DECT or IP DECT Server
While on a call, press R to answer a second incoming call. The first call is automatically put on
•
hold.
To disconnect the active call and return to the waiting call, press
•
To end both calls, press
•
To swap between two calls, press R.
•
Call Forward Unconditional
Call forward unconditional (CFU) is a system dependant feature.
To enable CFU press *21* followed by a number, then press #.
•
Press
to enable CFU. Confirmation in display and a tone indicates that the feature has
•
been activated.
Press
to hang up.
•
To disable CFU, press #21#, then press
•
Press
to hang up.
•
#21# code can be changed in the Spectralink DECT or IP DECT Server to fit your standard.
•
Turning Loudspeaker On/Off
Turning loudspeaker on allows other people in the room to listen to and participate in the
conversation. You may set the handset on a desk or table and leave your hands free.
To turn loudspeaker on/off:
While on a call, press Loud on to turn loudspeaker on.
1
To turn loudspeaker off, press Loud off.
2
14226905 Version 2.0
July, 2015
twice.
twice.
.
.
.
22