Danfoss iC7 Series Operating Manual page 26

iC7 Series PROFINET
Operating Guide
Value
Fault
Warning - Change Con-
trol Place
Warning - Change Con-
trol Place – Persistent
Table 15: Control Place Descriptions
Value
Local control
Fieldbus control
I/O control
Advanced control
26 | Danfoss A/S © 2023.06
Description
The drive issues a fault, and coasts the motor.
The drive issues a warning. The control place changes to the selected alternative while timeout warn-
ing is active. The control place changes back to the original control place when fieldbus process data
returns.
The drive issues a warning. The control place changes to the selected alternative if timeout warning
is active. The control place requires a reset command to change back to the original control place
after fieldbus process data returns.
Description
The drive is controlled by a connected control panel.
The drive is controlled via a fieldbus.
The drive is controlled via I/O.
The drive is controlled via a combination of I/O and fieldbus.
PROFINET Configuration
AQ408626183394en-000101 / 136R0280