Table of Contents
Advertisement
Find Quality Products Online at:
9 Performing the measurement
9.6.2 Flue Gas Analysis
To maintain the measuring accuracy of the instrument, the correct fuel
must be selected or configured.
Tap
(Fuels)
> Select fuel.
To achieve usable measurement results, the test time of a flue gas
measurement should be at least 3 minutes and the measuring
instrument should display stable readings.
If a separate
CO Air free
this value is calculated using the readings from the flue gas probe and
continuously updated.
1
Call up function:
|
2
Start measurement: Tap
Zeroing takes place.
Readings are displayed.
If the
Draft
measurement parameter is enabled in the reading display, a
draft measurement is automatically started in parallel to the flue gas
measurement. In the
measurement can be stopped/restarted. This draft measurement is
performed separately to a measurement of the
type.
48
GlobalTestSupply
www.
measurement has not yet been performed,
Flue Gas Analysis
.
List
measurement data view, the parallel draft
Draft
.com
measurement
sales@GlobalTestSupply.com
Advertisement
Table of Contents
