Table of Contents
Advertisement
Find Quality Products Online at:
9 Performing the measurement
2
Set parameters or enter values.
All values that can be modified have a dotted underlining.
Three circle diameters and three pipe lengths can be entered, which
are then used to calculate three partial volumes. The pipe volume is
calculated by adding these three partial volumes.
3
Pressurize the system.
4
Start stabilization time: tap
Reading is displayed.
Stabilization time is finished.
End stabilization time early: tap
5
End measurement: tap
Measuring time starts.
The readings are automatically saved and displayed after the
measurement has been completed.
6
The measuring value result can be assessed.
7
Conclude measurement: tap Next.
8
If applicable, repeat measurement: tap
56
GlobalTestSupply
www.
. If applicable, follow instructions.
.
.
.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
