Replacing The Suspension Hook; Replacing The Collector Nozzle - WAGNER PEM-X1 CG Translation Of The Original Operating Manual

Operating manual Powder Cup Gun PEM-X1 CG
8 Cleaning and Maintenance
8.9 REPLACING THE SUSPENSION HOOK
1.
2.
3.
4.
1. Loosen fastening screws on rear of hook and unscrew.
2. Slide hook in direction indicated by arrow and remove from gun housing.
3. Fit new hook on receiver and slide in direction indicated by arrow.
4. Fit fastening screws and tighten.
8.10 REPLACING THE COLLECTOR NOZZLE
The collector nozzle can be replaced if worn (for order number, see Connecting Tube,
Collector Nozzle [8 59]).
Order number 2326960 | Edition 10/2022
P_01734
41