Elation PROTEUS HYBRID WMG User Manual page 39

E-FLY WIRELESS DMX SETUP
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY FIXTURE, MAKE SURE THE
SOURCE E-FLY WIRELESS DMX TRANSCEIVER DEVICE IS OFF. TO CONTROL FIXTURE
WITH E-FLY WIRELESS DMX SIGNAL
1. Ensure the source E-FLY wireless DMX Transceiver device is powered OFF .
2. Power ON fixture and from the LCD control panel select DMX & E-FLY or E-FLY & OUT in the Select Signal
sub menu of the PERSONALITY main system menu.
3. From the LCD control panel set the E-FLY wireless channel to the same wireless channel of the source E-
FLY DMX Transceiver device in the Set E-FLY Chn sub menu of the PERSONALITY main system menu.
NOTE: Erratic fixture movement may occur if other E-FLY wireless DMX products are in use
in the same area and are using the same E-FLY wireless channel. The fixture may immediately
start to respond to the DMX wireless signal from another E-FLY wireless DMX Transceiver
immediately when E-FLY is enabled. Make sure to know what E-FLY wireless channels are being
used in the area where the fixture is being installed.
ELATION E-FLY WIRELESS TRANSCEIVER only has 0-14 wireless channels, NO CH 15.
4. Set fixture DMX address in the Set Dmx Address sub menu of the FUNCTION main system menu.
5. The E-FLY signal Indicator on the fixture LCD control display will illuminate
wireless DMX connection has been made or illuminate
repeat steps 1-4 above.
6. Repeat this process for all E-FLY compatible fixtures in the E-FLY wireless network, making sure all
fixtures are assigned the same E-FLY wireless channel.
7. After all fixtures in the E-FLY wireless network have been set to the same E-FLY wireless channel and
powered ON, now power ON the source E-FLY DMX Transceiver device.
8. Test all fixtures connected to the E-FLY wireless network to confirm proper functionality.
RED for NO connection. If no connection is made,
39
GREEN if a successful