Elation PROTEUS HYBRID WMG User Manual page 16

LAMP INSTALLATION
GASKET INSPECTION
CAREFULLY REMOVE ANY DEBRIS FOUND ON GASKET AND SCREW HOLES OF THE HEATSINK
MODULE USING A NONABRASIVE BRUSH BEFORE INSTALLING!
CAREFULLY INSPECT HEATSINK GASKET FOR SIGNS OF WEAR SUCH AS CRACKING OR
HARDENING, DEFORMITIES, OR ALIGNMENT ISSUES BEFORE INSTALLING!
ITEMS ABOVE CAN IMPEDE THE IP65 INTEGRITY AND/OR CAUSE INTERNAL DAMAGE.
CONTACT ELATION SERVICE REGARDING GASKET REPLACEMENT IF NEEDED.
16