FIXTURE INSTALLATION
OVERHEAD RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury.
Fixture is fully operational in the specific mounting positions illustrated below.
*SIDE MOUNTING
TO MAINTAIN IP65 RATING INTEGRITY,
FIXTURE MUST BE INSTALLED WITH
CABLES FACING DOWN TOWARDS THE
GROUND AT ALL TIMES. WATER MUST
EASILY RUN OFF AND NOT COLLECT
AROUND CABLE CONNECTIONS .
ALWAYS ATTACH A SAFETY CABLE
WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO
ENSURE THE FIXTURE WILL NOT DROP IF
THE CLAMP FAILS.
30
*SAFETY CABLE