Elation PROTEUS HYBRID WMG User Manual page 17

LAMP INSTALLATION
TORQUE SETTINGS FOR SCREWS
HEATSINK MODULE SCREWS MUST BE TIGHTENED WITH A TORQUE WRENCH.
The (4x) hex-head screws holding the heatsink module MUST be tightened with a torque-
wrench (not included).
TORQUE SETTING = 11 lbf-in. (12.7kgf-cm) *
* lbf-in = Pound Force Inches | kgf-cm = Kilogram Force Centimeters
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE ISSUES!
17