Table of Contents
Advertisement
8
Symptom
The edge of the printed output
is dirty.
The image is not aligned
properly on the paper.
8-24
Possible Cause
The document pad is dirty.
The selected paper size is
larger than the document
×
(with Zoom set to "
1.000").
The orientation of the
document is different from
the orientation of the paper
×
(with Zoom set to "
1.000").
The copy was reduced to a
size smaller than the paper
(a CustomZoom setting
was selected).
The document is not
positioned correctly.
The document is not
positioned correctly in the
duplexing document
feeder.
The original glass is dirty
(while using the duplexing
document feeder).
The document guides are
not positioned along the
edges of the paper.
Curled paper was loaded
into the paper drawer.
Troubleshooting
Remedy
Clean the document pad with
a soft cloth dampened with a
mild detergent.
Select a paper size that is the
same size as the document.
(See p. 6-5)
Otherwise, set Zoom to "Auto
Size" to enlarge the copy to
the selected paper size.
(See p. 3-7 and the advanced
version of the user manual on
the CD-ROM)
Select a paper size that is the
same size as the document.
Otherwise, select a paper
orientation that is the same as
that of the document.
Select a zoom ratio that
adjusts the document size to
the selected paper size.
(See p. 6-5)
Otherwise, set Zoom to "Auto
Size" to reduce the copy to
the selected paper size.
(See p. 3-7 and the advanced
version of the user manual on
the CD-ROM)
Correctly position the
document against the
document width scale.
(See p. 5-5)
Correctly load the document
into the duplexing document
feeder, and then slide the
document guides against it.
(See p. 5-5)
Open the duplexing
document feeder, and
correctly position the
document against the
document width scale.
(See p. 5-5)
Wipe the glass with a soft dry
cloth.
Slide the document guides
against the edges of the
paper.
Flatten the paper before
loading it.
d-Color MF 20
Advertisement
Table of Contents
