Table of Contents
Advertisement
Troubleshooting
4
Open the front door of the finisher.
5
Turn misfeed-clearing dial
clockwise until the removal indicator
is completely blue.
H
If the dial is turned too far, turn it
counterclockwise to adjust it.
H
If the message "Misfeed
detected". appears, be sure to
perform these steps. If the paper
is pulled out with too much force
without performing these
steps, the finisher may be
damaged.
6
Open the upper door of the finisher,
and then pull out any paper in the
feed section.
7
Close the upper door.
8
Pull out any paper fed into the
output tray.
d-Color MF 20
8
8-15
Advertisement
Table of Contents
