Components And Their Functions - Minolta d-Color MF 20 Manual

Features and Components
3.3

Components and Their Functions

6
No. Part Name
1 Duplexing Document Feeder
AFR-18 (optional)
2 Scanner SC-1
3 Copier printer section
4 Copy Desk CD-2M (optional)
5 Large Capacity Cabinet
PF-121 (optional)
6 Finisher FN-116 (optional)
7 Option Tray JS-100
(optional)
d-Color MF 20
7
1
2
3
5
Description
Automatically feeds and scans one document sheet
at a time, and automatically turns over double-sided
documents and scans them
Referred to as the duplexing document feeder
throughout the manual
Scans the document
Referred to as the scanner throughout the manual;
in addition, the combination of the scanner and the
printer is referred to as the copier.
Prints the image scanned with the scanner
Referred to as the printer throughout the manual; in
addition, the combination of the scanner and the
printer is referred to as the copier.
The printer can be set up on the copy desk.
By setting up the printer on the copy desk, the printer
can be placed on the floor instead of on a desk,
keeping the entire surface of the desk free.
Referred to as the copy desk throughout the
manual
Equipped with a paper drawer that can supply 2,500
sheets of paper
Referred to as the large capacity cabinet
throughout the manual
Finishes copies according to the selected Finishing
setting (sorting or stapling), then feeds out the pages
• If the finisher is installed, the printer must be
installed on the copy desk, on the large capacity
cabinet or over a paper feed unit combined with
the copy table.
If finisher FN-116 is installed, the number of paper
output trays can be increased.
3
4
3-15