Table of Contents
Advertisement
8
6
Insert the staple holder until it locks
into place.
7
Slide the finisher back against the
copier.
H
If stapling still cannot be
performed, even after
performing the above
procedure, contact your
technical representative.
To clear jammed staples in FN-8
CAUTION
Stapler unit may be damaged
§
Do not pull out the paper in any other way than described below.
1
Slide the finisher away from the
copier.
2
Open the cover of the horizontal
transport unit.
3
Remove any paper, and then close
the cover of the horizontal transport
unit.
8-18
Troubleshooting
d-Color MF 20
Advertisement
Table of Contents
