THORLABS LabView DCU2 Series Programming Manual page 64

62 DCx camera
3
Appendix
This chapter contains the following sections:
Example programs
List of return values
3.1 Example programs
The following example programs are installed with the uc480 LabVIEW interface. The NI
Vision module must be installed for some examples.
LiveStream_8bit
LiveStream_8bit starts live operation of the camera in 8-bit mode and displays the
captured images.
Various camera settings can be made.
LiveStream_32bit
LiveStream_32bit starts live operation of the camera in 32-bit mode and displays the
captured images.
Various camera settings can be made.
LiveStream_32bit_Vision
LiveStream_32bit_Vision starts live operation of the camera in 32-bit mode and displays
the recorded images using the Vision module.
Various camera settings can be made.
SingleCapture_8bit
SingleCapture_8bit captures an image from the camera in 8-bit mode at the touch of a
button and displays this image.
Various camera settings can be made.
Trigger_8bit
Trigger_8bit captures an image from the camera in 8-bit mode and displays this image.
In addition, the camera's trigger mode can be activated and various camera settings can
be made.
All manuals and user guides at all-guidesbox.com
62
63
© 2010 Thorlabs