THORLABS LabView DCU2 Series Programming Manual page 21

2.9
GetActSeqBuf
Description:
GetActSeqBuf
being written. This function is only available if ring buffering is activated. If image capture
for ring buffering has been started,
until image capture to the first image buffer of the sequence has begun. The number is
not the ID of the image buffer issued by
sequential number in the
Parameters:
Camera Handle In/Out
Memory Number
Active Image Mem
Last Image Mem
error in/out
VI:
Related functions
GetActImgMem
© 2010 Thorlabs
All manuals and user guides at all-guidesbox.com
returns the number of the image buffer to which an image is currently
GetActSeqBuf
SetAllocatedImageMem
AddToSequence
Handle on camera
Will contain the number of the image buffer to
which the image is currently being written:
0:
1 to max.: Image capture to sequence image
LabVIEW array to which the image is currently
being captured
LabVIEW array to which an image was last
captured
Error code
18
uc480 VIs
returns the value 0 in Memory Number
, rather it is the
logon sequence.
11
Image capture to first image buffer has
not yet started
buffer N has started
19