THORLABS LabView DCU2 Series Programming Manual page 47

2.36
SetExposureTime
Description:
The
As this value can only be set in multiples of a line duration, the actual exposure time
may differ from the chosen value. The exposure time actually set after this function has
been called is returned by the new exposure time parameter.
Parameters:
Camera Handle In/Out
Mode
IS_GET_EXPOSURE_TIME (32768)
IS_GET_DEFAULT_EXPOSURE (32769)
IS_SET_EXPOSURE_TIME (32900)
Exposure Time
new exposure time
error in/out
VI:
Related functions
GetExposureRange
SetAutoParameter
© 2010 Thorlabs
All manuals and user guides at all-guidesbox.com
function sets the exposure time given in Exposure Time in ms.
SetExposureTime
21
37
Handle on camera
Only returns the current exposure time via the
parameter
newEXP
Returns the standard exposure time
Sets the exposure time given in Exposure Time
New desired exposure time.
If = 0.0 is passed, an exposure time of 1/frame
EXP
rate will be used.
Returns the actually set exposure time
Error code
uc480 VIs 45