THORLABS LabView DCU2 Series Programming Manual page 54

52 DCx camera
2.43
SetHotPixelCorrection
Description:
SetHotPixelCorrection
status to be queried.
Parameters:
Camera Handle In/Out
Mode
Value
error in/out
VI:
All manuals and user guides at all-guidesbox.com
allows hot pixel correction to be switched on/off or the current
IS_BPC_DISABLE (0)
IS_BPC_ENABLE_SOFTWARE (2)
IS_GET_BPC_MODE (32768)
Handle on camera
Deactivates the correction
Activates the software correction based on the
hot pixel list stored in the EEPROM
Returns the current mode
Contains the current
:
IS_GET_BPC_MODE
0 = Disabled
1 = Enabled
Error code
mode when using
© 2010 Thorlabs