THORLABS LabView DCU2 Series Programming Manual page 12

10 DCx camera
2
uc480 VIs
The driver library provides the VIs described in this manual to integrate uc480 cameras into
LabVIEW. The VIs are located in the function palette under
Own libraries->uc480.
The descriptions of the uc480 VIs are listed in alphabetical order and are structured as follows:
Description:
Description of the VI
Parameters:
Description of the inputs and outputs
VI:
Image of the VI with all inputs and outputs
Functions that use an array that was created beforehand in another VI do not function properly.
The array is located in a different area of memory after the VI is exited. If this can be bypassed, all
functions can be used as usual.
Related functions:
List of similar or associated VIs.
All manuals and user guides at all-guidesbox.com
© 2010 Thorlabs