Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
3
Remove the
display
assembly.
4
Remove the
display
bezel.
5
Remove the
display
panel.
Identifier
Status
Procedure
1
Remove the eight screws (M2.5x2.5) that secure the hinges to the display back-cover and antenna assembly.
2
Remove the two screws (M2x2) that secure the hinge brackets to the display back-cover and antenna assembly.
3
Lift the hinges and brackets off the display back-cover and antenna assembly.
GUID-6C4E9746-B780-409D-B703-9A43273C227D
Released
Removing the display hinges
computer. After working inside your computer, follow the instructions in
GUID-5F89BAD7-9F49-462B-8CD0-9CD45C3725DA
Released
GUID-95FC0CF5-6784-46E3-B890-462819018526
Released
47
After working inside
www.dell.com/
Removing the display hinges
99
Advertisement
