Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the fan with the screw holes on to the palm rest and keyboard assembly.
2
Replace the two screws (M2.5x6) that secure the fan to the palm rest and keyboard assembly.
3
Connect the fan cable to the system board.
4
Route the display cable through the routing guides on the fan.
5
Connect the display cable to its connector on the system board and close the latch.
GUID-2596AFC0-F1E8-4A0E-A603-7D2CFE582ECE
Released
computer. After working inside your computer, follow the instructions in
GUID-802B3DCE-DB4A-4D01-960D-DAFAD77D93F1
Released
Replacing the fan
After working inside
www.dell.com/
Replacing the fan
14
33
Advertisement
